Load data for .45 Auto (ACP) + .451 | 230gr | CamPro HP

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.451 \| 230gr \| CamPro HP
Bullet Weight:	230gr \| 14.9g
Bullet Diameter:	0.451" \| 11.46mm
Bullet Length:	0.616" \| 15.6mm
Caliber:	.45 Auto (ACP) load data
Case Length (l3):	0.898" \| 22.8mm
Cartridge Length (C.O.L.):	1.256" \| 31.9mm
Seated Depth:	0.258" \| 6.6mm
Shank Seated Depth:	0.258" \| 6.6mm
Case Capacity:	25.0 Grains of Water \| 1.62 cm³
Primer Size:	Large Pistol (LP)
Max. allowed Pressure:	18855 psi \| 1300 bar
LID:	LID_B10039_C724
Last updated:	2025-01-01

Load data for 46 loads in caliber .45 Auto (ACP) with .451 | 230gr | CamPro HP bullet and 23 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AP 100]*	<<locked>>	88%	18710	99%	**1	83%
Accurate No. 2	<<locked>>	64%	18086	96%	**2	94%
Accurate Solo 1250	<<locked>>	69%	18028	96%	**9	100%
Alliant UNIQUE	<<locked>>	68%	17056	90%	**5	96%
Baschieri & Pellagri 100	<<locked>>	65%	18840	100%	**3	100%
Hodgdon TrailBoss	<<locked>>	95%	10370	55%	**6	100%
Lovex S020	<<locked>>	64%	18014	96%	**9	98%
Maxam CSB 1	<<locked>>	70%	17405	92%	**3	100%
Maxam CSB 2	<<locked>>	72%	18362	97%	**2	100%
Maxam CSB 3	<<locked>>	66%	18217	97%	**3	100%
ReloadSwiss RS 20	<<locked>>	75%	18826	100%	**8	99%
[Rottweil P 806]*	<<locked>>	88%	17709	94%	**50	89%
SNPE Vectan A0	<<locked>>	72%	18449	98%	**2	97%
SNPE Vectan BA 9	<<locked>>	65%	18855	100%	**9	99%
[SNPE Vectan BA7 1/2]*	<<locked>>	77%	17738	94%	**2	88%
SNPE Vectan BA9 1/2	<<locked>>	64%	17680	94%	**2	100%
Somchem MP200	<<locked>>	64%	18115	96%	**2	96%
Somchem MS200	<<locked>>	65%	17274	92%	**6	97%
Vihtavuori 3N37	<<locked>>	73%	17535	93%	**2	90%
Vihtavuori N32C Tin Star	<<locked>>	85%	17970	95%	**7	100%
Vihtavuori N330	<<locked>>	65%	16998	90%	**2	100%
Vihtavuori N340	<<locked>>	67%	17303	92%	**2	97%
Vihtavuori N350	<<locked>>	77%	18231	97%	**1	91%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AP 100]*	<<locked>>	85%	17289	92%	**2	81%
Accurate No. 2	<<locked>>	61%	16085	85%	**6	92%
Accurate Solo 1250	<<locked>>	61%	14460	77%	**0	99%
Alliant UNIQUE	<<locked>>	61%	13996	74%	**3	93%
Baschieri & Pellagri 100	<<locked>>	61%	16737	89%	**0	100%
Hodgdon TrailBoss	<<locked>>	89%	9181	49%	**6	100%
Lovex S020	<<locked>>	61%	16114	85%	**3	97%
Maxam CSB 1	<<locked>>	62%	13996	74%	**4	98%
Maxam CSB 2	<<locked>>	60%	12995	69%	**7	100%
Maxam CSB 3	<<locked>>	62%	16244	86%	**6	100%
ReloadSwiss RS 20	<<locked>>	62%	12676	67%	**0	94%
[Rottweil P 806]*	<<locked>>	77%	12473	66%	**2	82%
SNPE Vectan A0	<<locked>>	61%	13851	73%	**4	93%
SNPE Vectan BA 9	<<locked>>	61%	17158	91%	**6	99%
[SNPE Vectan BA7 1/2]*	<<locked>>	64%	12473	66%	**1	82%
SNPE Vectan BA9 1/2	<<locked>>	60%	16012	85%	**0	99%
Somchem MP200	<<locked>>	61%	16505	88%	**2	94%
Somchem MS200	<<locked>>	61%	15664	83%	**6	96%
[Vihtavuori 3N37]*	<<locked>>	61%	12169	65%	**4	83%
Vihtavuori N32C Tin Star	<<locked>>	62%	10138	54%	**2	100%
Vihtavuori N330	<<locked>>	62%	15273	81%	**6	100%
Vihtavuori N340	<<locked>>	61%	14040	74%	**3	94%
[Vihtavuori N350]*	<<locked>>	61%	11414	61%	**7	82%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.